Locate studs, live wires, copper pipes, and rebar before you drill with the WallScout HW-710—a compact, five‑mode wall scanner that reveals hidden structures through drywall, plaster, and concrete.
Five scan modes live in one pocket-friendly device, controlled by four buttons. The LCD guides you to the exact stop point, letting you center over a target and drill with confidence.
- ½ inch stud
- 1 inch stud
- 1½ inch stud
- Metal detection at 38 mm
- Live AC current up to 51 mm
Center Lock: as you scan, the bar graph fills and locks to CENTER when you’re directly above a target, so you can mark the spot and drill without second‑guessing.
Live AC wire detection reaches up to 51 mm (about 2 inches). If energized cable is detected, a flashing light and audible beep activate immediately, reducing the risk of hitting a live circuit.
Wood, metal, and rebar are identified separately. It offers three wood-depth options—13 mm, 25 mm, and 38 mm—plus a metal mode that locates rebar, nails, and copper through concrete or drywall up to 38 mm deep.
This tool is pocket-sized and designed for one‑hand operation: 15 cm tall, 6.7 cm wide, 3 cm thick, four buttons, no apps, no calibration, no setup—grab, scan, and mark your spot.
Use it for mounting TVs, hanging mirrors, or installing outlets—drill with assurance by pinpointing the exact center and what lies behind the surface before you touch the drill.
| Capability | WallScout HW-710 | Cheap Stud Finders |
|---|---|---|
| Detects Live AC Wires Up To 51mm | ✅ | ❌ |
| Wood + Metal + AC In One Tool | ✅ | ❌ |
| LCD Depth Read + Audio Beep + Center Lock | ✅ | ❌ |