Lock your bottle in place on rough rides
VeloGrip is a spring-loaded handlebar cage that clamps your bottle from above while a textured rubber base supports it below — preventing rattles, wobble, or ejection at the first pothole.
Install on bikes, e-bikes, and most motorcycle bars in under a minute. No drilling, no zip ties, and no airborne bottles.
Cheap plastic cages lose their grip after a few months. Generic clamp holders shake at speed and toss your bottle the minute you hit rough terrain. Maybe you’ve already lost a Yeti or Stanley to the pavement—or you’re one bump away from it. Every time you reach for a sip mid-ride, your eyes leave the road. VeloGrip solves it with solid mechanical tension, not just friction and wishful thinking.
- Spring-Tensioned Arm Clamps the Bottle From Above: A stainless steel wire arm holds firm on the bottle neck—unlike plastic cages, it doesn’t loosen over time and stands up to potholes, speedbumps, and gravel.
- Rubber Boot at the Bottom Prevents Vertical Slippage: The textured, grippy pad supports the bottle’s base, so even at highway speeds it won’t wobble loose downward.
- Universal Handlebar Clamp Fits Bikes and Motorcycles: The padded clamp wraps standard bike, e-bike, scooter, and motorcycle bars. Just one bolt, no frame mounts or drilling required.
Riders who’ve Lost a Bottle Once Don’t Ride Without It. Marco T. says the steel spring arm stays rock solid, even over railroad tracks at 25 mph. Janelle R. notes it fits the Stanley, Yeti, and most insulated cans, and is the first holder she’s used where she doesn’t check the bottle every 30 seconds.
Ride Hands-Free, Hydrate Without Taking Your Eyes Off the Road
- One-handed grab and replace: Press your thumb to lift the spring arm, so your gaze stays forward as you sip.
- Compatible with bottles you already own: Fits 16-24 oz bottles, Yetis, Stanleys, standard energy cans, and most insulated tumblers.
- Durable beyond one season: Impact-resistant ABS body, stainless steel spring arm, weatherproof rubber boot — resists cracking from sun and heat.
Mount It in Under a Minute Step 1: Wrap the padded clamp around your handlebar and tighten the single bolt using the included hex key. Step 2: Lift the spring arm, slide your bottle into the cage, and let the arm settle securely on top of the cap. Step 3: Ride. Reach for your bottle when needed — press up the spring arm with your thumb, sip, then drop it back in.
| VeloGrip | Plastic Frame Cage | No Holder |
|---|---|---|
| Two-point grip — spring arm plus rubber boot | ❌ Single-point sidewall flex—weakens with wear | ❌ Bottle stuck in backpack or nowhere to be found |
| Clamps onto any handlebar — no frame mounts required | ❌ Requires threaded frame holes—unsuitable for motorcycles or e-bikes | ❌ Stop, fumble, drink, and go |
| Fits Yetis, Stanleys, energy cans, water bottles | ❌ Only fits standard cycling bottles | ❌ No bottle fits where there’s no holder |
